Heat supply control unit BUT-10 allows:
- By affecting the heat flows, reducing the heat loss of the object at times when the heating parameters are exceeded in the autumn and spring periods and at times when the heat supply does not respond quickly enough to changed external conditions
- By affecting heat flows, limiting the consumption of heat energy on weekends and holidays, as well as at night
- Compensating for the effects of solar radiation and wind
- Stabilizing the temperature in the hot water supply pipelines within the limits defined by the regulatory documentation in cases of pressure drops over 20 m of water column
- Compensating for an imbalance in the heating system when the ventilation system of the object is switched on or off, as well as duplicate the ventilation automation in case of its absence
Specifications
|
Weight, kg |
3,2 |
|
Dimensions (width x height x depth), mm |
320x170x70 |
|
Power supply voltage, V |
24 |
|
Input interface |
– 4 channels: Temperature sensors DS18*20, up to 50 pics – 4 channels: Heat meters according to RS 232 protocol in accordance with the exchange protocols defined by the manufacturers – 4 channels: Discrete inputs for monitoring the presence of duct in the hot water supply pipeline, power supply and status of the pump – 4 channels: 4 to 20 mA analog input (Pressure sensors) |
|
Output interface |
– 1 channel: controlled by two relays, switching up to 220V – 1 channel: Switchable relay, switching 220V – 2 channels: controlled by triacs, for operаtion with relay IMs, switching 24V – 3 channels: 4-20 mA current outputs |
|
Switching ports |
SD card or MMC card USB of В type LAN – interface RS-232 Port for programming |